強化后表面痕跡熒光筆可為在特殊領域使用示痕劑流體的薄質涂料提供便利方法，且無需使用遮罩。這已在拋噴丸強化部分的初始工程設置階段以及通過在拋噴丸強化生產中監視關鍵領域（齒輪等）證明其有用性。
覆蓋率檢測熒光追蹤筆
用以檢查覆蓋率的熒光追蹤筆 | 編號 | 價格 | |
| 強化后表面痕跡熒光筆可為在特殊領域使用示痕劑流體的薄質涂料提供便利方法，且無需使用遮罩。這已在拋噴丸強化部分的初始工程設置階段以及通過在拋噴丸強化生產中監視關鍵領域（齒輪等）證明其有用性。其可用于兩種熒光示痕劑流體，適用流體的選擇需根據金屬的硬度和拋噴丸強化工藝的強度進行。220-2表面痕跡熒光筆應用于較軟的底座金屬、較軟的彈丸和強度較低的噴丸。220-6表面痕跡熒光筆應用于較硬的底座金屬、較硬的彈丸和強度較高的噴丸。最低訂購量：1盒=6支 | 750 200 （220-2熒光追 蹤筆） 750 210 （220-6熒光追 蹤筆） | Call |
Fluorescent Tools to check Coverage | Ref. No.: | ￥ | |
| Peenscan Pens provide a convenient method for applying a thin coating oftracer fluid to very specific areas of a part without the need for masking.This has proven useful during initial engineering set-up of a part for shotpeening as well as for monitoring critical areas (gear teeth, etc.) duringproduction shot peening. It is available with two fluorescent tracer fluidsand selection of the appropriate fluid is dependent on the hardness of themetal and the intensity of the shot peening process. The eenscan 220-2pen should be used for softer base metals, softer shot and lower peeningintensities. The 220-6 pen should be used for harder base metals, hardershot and higher peening intensities. Minimum Order: 1 box = 6 pieces | 750 200 (Peenscan 220-2) 750 210 (Peenscan 220-6) | Call |
覆蓋率檢測熒光追蹤筆
用以檢查覆蓋率的熒光追蹤筆 | 編號 | 價格 | |
| 強化后表面痕跡熒光筆可為在特殊領域使用示痕劑流體的薄質涂料提供便利方法，且無需使用遮罩。這已在拋噴丸強化部分的初始工程設置階段以及通過在拋噴丸強化生產中監視關鍵領域（齒輪等）證明其有用性。其可用于兩種熒光示痕劑流體，適用流體的選擇需根據金屬的硬度和拋噴丸強化工藝的強度進行。220-2表面痕跡熒光筆應用于較軟的底座金屬、較軟的彈丸和強度較低的噴丸。220-6表面痕跡熒光筆應用于較硬的底座金屬、較硬的彈丸和強度較高的噴丸。最低訂購量：1盒=6支 | 750 200 （220-2熒光追 蹤筆） 750 210 （220-6熒光追 蹤筆） | Call |
Fluorescent Tools to check Coverage | Ref. No.: | ￥ | |
| Peenscan Pens provide a convenient method for applying a thin coating oftracer fluid to very specific areas of a part without the need for masking.This has proven useful during initial engineering set-up of a part for shotpeening as well as for monitoring critical areas (gear teeth, etc.) duringproduction shot peening. It is available with two fluorescent tracer fluidsand selection of the appropriate fluid is dependent on the hardness of themetal and the intensity of the shot peening process. The eenscan 220-2pen should be used for softer base metals, softer shot and lower peeningintensities. The 220-6 pen should be used for harder base metals, hardershot and higher peening intensities. Minimum Order: 1 box = 6 pieces | 750 200 (Peenscan 220-2) 750 210 (Peenscan 220-6) | Call |
